Description
Pyramex GL402C5 Poly-Torq Polyurethane Cut-Resistant A4 Gloves combine cut resistance with the grip and dexterity needed for precise handling. A 13-gauge HPPE liner provides cut-resistant construction, while the polyurethane (PU) coating delivers a dependable grip without a sticky feel.
When a task shifts from handling materials to positioning smaller components, wearers benefit from tactile sensitivity that supports controlled movements. The gloves also offer tear and abrasion resistance, with low particulate shedding to help limit loose particles during work.
Key Features
- ANSI cut rating A4: Provides the listed level of cut resistance.
- 13-gauge HPPE liner: Combines cut-resistant construction with dexterity.
- Polyurethane coating: Provides grip without a sticky feel.
- Tear and abrasion resistance: Supports material-handling tasks.
- Low particulate shedding: Helps limit loose particles from the gloves.
- Tactile sensitivity: Supports detailed work and precise handling.
Performance Ratings
- ANSI cut rating: A4
- Abrasion rating: 4
- Circular blade cut rating: 5
- Tear rating: 4
- Puncture rating: 3
Materials
- Coating: Polyurethane (PU)
- Liner shell: 13-gauge HPPE
- Cuff: HPPE and latex elastic
Latex allergy warning: The wrist cuff contains latex, which may cause allergic reactions. These gloves should not be used by individuals with a known latex allergy or those who develop signs of hypersensitivity.
Cleaning and Care
- Wash in warm water at 30–40°C (86–104°F).
- Use a mild detergent.
- Use a short wash cycle of 5–10 minutes.
- Tumble dry on low at a maximum of 60°C (140°F).
Chemicals and sharp objects should not be used to clean the gloves. Cleaning can alter the gloves' performance levels.
Standards
The CE EN388 standard evaluates abrasion, cut, tear, and puncture resistance. Abrasion ratings reflect the cycles required to wear through a sample; circular blade cut ratings reflect the cycles required to cut through a sample at a constant speed. Tear and puncture ratings reflect the force required to tear or pierce a sample, with puncture testing using a standard-sized point.
ANSI cut ratings range from A1 through A9 and are based on the weight required to cut through the material. The GL402C5 is listed with an A4 cut rating.